Starlink Mini Road Bundle - vehicle mount, power & magnets

Starlink Mini Road Bundle - Low-profile vehicle mount, power & magnets for removable setup. 

The Starlink Mini Road Bundle is a premium vehicle mounting solution engineered for travellers, 4WD operators, utility trucks, field crews and remote technicians who require a solid, stable, vehicle-mounted Starlink Mini while driving.

The bundle integrates a low-profile Australian Made aluminium in-motion mount, a Australian Certified 12V → 35V DC power regulator booster, and four rubber-coated rare-earth magnets for secure non-permanent mounting on suitable metal surfaces when extra portability is required. The mount is compatible with most mainstream mounting and racking systems should you choose to use fixings. 

Kit Inclusions: 

• 1 x Australian Made, Powder Coated aluminium vehicle mount for Starlink Mini (Choose Colour)  
• 4 x High Stength Rare Earth Magnets in M8 thread 
• 1 x Certified Regulated DC Voltage Booster 12v to 35v (Choose Plug)
• Fastener Pack (please double check suitability for your specific install) 

Note: Starlink Mini terminal is NOT included and can be purchased from Starlink.com or major retailers. 

Tip 💡:  You may also require an additional Starlink Mini DC Power cable if you don't want to use the 15m cable that came in the box with your Starlink Mini. A smaller cable for this install can be purchased here.

Key Features

✅ Low-Profile In-Motion Mount — Aerodynamic aluminium assembly designed for vehicle travel, reducing wind load and vibration. Made in Australia. 

✅ Roof-Rack Bolt Pattern — Pre-aligned hole positions compatible with common rack systems for fixed mechanical installation.

✅ Magnet-Compatible Base — Works with included rubber-coated rare-earth magnets for controlled, non-permanent mounting on metal panels.

✅ Regulated 12 V Power Path — Certified DC-DC booster maintains a stable 35 V output from vehicle electrical systems.

✅ High-Grip Rare-Earth Magnets — Rubber-coated M8-thread magnets provide secure placement while protecting painted surfaces.

✅ In-Motion Ready Design — Engineered for vibration environments, corrugated roads and dynamic load conditions typical of touring use.

Installation Overview

1. Confirm the mounting surface (roof rack or metal panel) is structurally suitable for dynamic loads.
2. For rack installation, align the pre-drilled holes and secure using appropriate bolts and torque settings.
3. For magnetic installation, place the magnets evenly on a clean, rigid metal panel and attach the mount using M8 threads.
4. Connect the DC-DC booster to the selected 12 V power source (cigarette lighter or Anderson-style).
5. Route the Mini power cable securely, avoiding sharp edges and abrasion points.
6. Verify stable 35V output before powering the Starlink Mini.
7. Inspect all fixings regularly when operating in motion or on corrugated terrain.

Important Notes

⚠️ Use in motion is at your own risk.
⚠️ Dynamic wind loads increase significantly at speed; ensure all fixings are secure before travel.
⚠️ Magnetic mounting should only be used on flat, rigid metal panels free from dust or moisture.
⚠️ Secondary tethers or restraints are recommended for all in-motion installations.